ISCSI kasutamine Gentooga

iSCSI serveri seadistus

Unmaskime iscsitargeti

# "echo "sys-block/iscsitarget" >> /etc/portage/package.keywords" 

Paigaldame iscasitargeti

# emerge iscsitarget 

Teeme iscsi_trgt mooduli stardil laaditavaks

#echo "iscsi_trgt" >> /etc/modules.autoload.d/kernel-2.6 

Loome ietd.conf faili

/etc/ietd.conf

Target iqn.2001-04.org.gentoo:iSCSI.test.disk1 
        Lun 0 Path=/dev/hda5,Type=fileio 
        MaxConnections          1 
        #InitialR2T              Yes 
        #ImmediateData           No 
        #MaxRecvDataSegmentLength 8192 
        #MaxXmitDataSegmentLength 8192 
        #MaxBurstLength          262144 
        #FirstBurstLength        65536 
        #DataPDUInOrder          Yes 
        #DataSequenceInOrder     Yes 
        #ErrorRecoveryLevel      0 
        #HeaderDigest            CRC32C 
        #DataDigest              CRC32C 
        #Wthreads                8

Stardime ietd deemoni

# /etc/init.d/ietd start

Jumbod kindlasti lubada kui switch ja kõik masinad toetavad.

• http://www.gentoo-wiki.info/TIP_Jumbo_Frames