Vinum gvinum ja geom - Redigeerimiste ajalugu

Jj – 24. november 2009, kell 16:58

2009-11-24T16:58:30Z

←Vanem redaktsioon		Redaktsioon: 24. november 2009, kell 16:58
22. rida:		22. rida:
	sd length 128m drive c		sd length 128m drive c
	sd length 128m drive d		sd length 128m drive d


	mirroring		mirroring
75. rida:		74. rida:
	katse# gmirror load		katse# gmirror load
	katse# gmirror insert gm0 /dev/da2		katse# gmirror insert gm0 /dev/da2


	newfs /dev/mirror/gm0		newfs /dev/mirror/gm0
	mount /dev/mirror/gm0s1d /mnt		mount /dev/mirror/gm0s1d /mnt

	~~===~~raid 10 ~~===~~		raid 10

	kettaid neil ad1 ad2 ad3 ad4		kettaid neil ad1 ad2 ad3 ad4

Jj – 24. november 2009, kell 16:57

2009-11-24T16:57:39Z

←Vanem redaktsioon		Redaktsioon: 24. november 2009, kell 16:57
1. rida:		1. rida:

	===vinum===		===vinum===

	~~http://www.vinumvm.org/~~


	Starting up Vinum Early Enough for the Root Filesystem '''/boot/loader.conf'''		Starting up Vinum Early Enough for the Root Filesystem '''/boot/loader.conf'''
13. rida:		9. rida:
	geom_vinum_load="YES"		geom_vinum_load="YES"
	vinum.autostart="YES"		vinum.autostart="YES"


	fdisk -i teha		fdisk -i teha
19. rida:		14. rida:
	disklabel -e devname		disklabel -e devname



	stripe		stripe

29. rida:		22. rida:
	sd length 128m drive c		sd length 128m drive c
	sd length 128m drive d		sd length 128m drive d



41. rida:		33. rida:
	plex org concat		plex org concat
	sd length 76000M drive d2		sd length 76000M drive d2


	gvinum create -f /etc/vinum.conf		gvinum create -f /etc/vinum.conf

	hiljem newfs -v		hiljem newfs -v


	===gstripe===		===gstripe===
77. rida:		67. rida:

	fsck_ffs /dev/stripe/data		fsck_ffs /dev/stripe/data



	===gmirror===		===gmirror===


	katse# gmirror label -vnb round-robin gm0 /dev/da1		katse# gmirror label -vnb round-robin gm0 /dev/da1
92. rida:		79. rida:
	newfs /dev/mirror/gm0		newfs /dev/mirror/gm0
	mount /dev/mirror/gm0s1d /mnt		mount /dev/mirror/gm0s1d /mnt


	===raid 10 ===		===raid 10 ===

Jj – 30. detsember 2007, kell 14:41

2007-12-30T14:41:28Z

←Vanem redaktsioon		Redaktsioon: 30. detsember 2007, kell 14:41
1. rida:		1. rida:
	~~===Geli===~~

	~~Ketaste krüpteerimine FreeBSD süsteemis~~

	~~Kõigepealt on vaja geli tuge tuuma. Seda saab kas~~
	~~kompileerides tuuma uuesti või lihtsam lisada '''/etc/rc.conf''~~
	~~faili rida~~

	~~geom_eli_load="YES"~~

	~~ja teha reboot~~

	~~peale rebooti peaks dmesgis olema näha rida~~

	~~cryptosoft0: <software crypto> on motherboard~~

	~~Ketas mida soovime krüpteerida on '''/dev/da0'''~~

	~~Teeme kettale vajaliku võtme~~

	~~dd if=/dev/random of=/root/da0.key bs=64 count=1~~
	~~1+0 records in~~
	~~1+0 records out~~
	~~64 bytes transferred in 0.000397 secs (161126 bytes/sec)~~

	~~Seejärel seome võtme kettaseadmega ja paneme paika parooli~~
	~~millega saame edaspidi kasutada~~

	~~geli init -s 4096 -K /root/da0.key /dev/da0~~
	~~Enter new passphrase:~~
	~~Reenter new passphrase:~~

	~~Ning haagime ketta külge~~

	~~geli attach -k /root/da0.key /dev/da0~~
	~~Enter passphrase:~~

	~~dmesgi peaks ilmuma seejäre teade~~

	~~GEOM_ELI: Device da0.eli created.~~
	~~GEOM_ELI: Encryption: AES-CBC 128~~
	~~GEOM_ELI: Crypto: software~~

	~~kausta /dev peaks nüüd olema tekkinud uus seade da0.eli~~

	ls /dev/da0*
	~~/dev/da0 /dev/da0.eli~~

	~~Alustame uue failisüsteemi loomist. Selleks on~~
	~~soovitatav kirjutada kogu ketas algusest lõpuni suvalise infoga üle.~~
	~~See võib võtta suurema ketta puhul aega 3-4 tundi.~~

	~~dd if=/dev/random of=/dev/da0.eli bs=1m~~
	~~40859860992 bytes transferred in 10024.286856 secs (4076087 bytes/sec)~~

	~~Loome uue failisüsteemi~~

	~~newfs /dev/da0.eli~~
	~~/dev/da0.eli: 69464.8MB (142263992 sectors) block size 16384, fragment size 4096~~
	~~using 207 cylinder groups of 336.98MB, 21567 blks, 21568 inodes.~~
	~~super-block backups (for fsck -b #) at:~~

	~~Ja moundime enda ketta~~

	~~mount /dev/da0.eli /mnt~~

	df
	~~Filesystem 1K-blocks Used Avail Capacity Mounted on~~
	~~...~~
	~~/dev/da0.eli 70009144 8 64408408 0% /mnt~~

	~~Lahtihaakimiseks käsud~~

	~~umount /mnt~~
	~~geli detach da0.eli~~

	~~Ja dmesgi tekib lahtiühenduse kohta teade~~

	~~GEOM_ELI: Device da0.eli destroyed.~~

	~~Uuesti haakida saab siis käskudega. Kasutada~~
	~~tuleb varem nimetatud paroole~~

	~~geli attach -k /root/da0.key /dev/da0~~
	~~mount /dev/da0.eli /mnt~~

	~~rc.conf'i automaatseks stardiks.~~
	~~Ei pääse muidugi iga taaskäivituse järle paroolide trükkimisest~~

	~~geli_devices="da0"~~
	~~geli_da2_flags="-p -k /root/da0.key"~~

	===vinum===		===vinum===

Jj – 30. detsember 2007, kell 14:40

2007-12-30T14:40:19Z

←Vanem redaktsioon		Redaktsioon: 30. detsember 2007, kell 14:40
1. rida:		1. rida:
	===Geli===		===Geli===

	rc.conf		Ketaste krüpteerimine FreeBSD süsteemis

			Kõigepealt on vaja geli tuge tuuma. Seda saab kas
			kompileerides tuuma uuesti või lihtsam lisada '''/etc/rc.conf''
			faili rida

	geom_eli_load="YES"		geom_eli_load="YES"

	cryptosoft0: <software crypto> on motherboard		ja teha reboot

			peale rebooti peaks dmesgis olema näha rida

			cryptosoft0: <software crypto> on motherboard

			Ketas mida soovime krüpteerida on '''/dev/da0'''

			Teeme kettale vajaliku võtme

	dd if=/dev/random of=/root/da0.key bs=64 count=1		dd if=/dev/random of=/root/da0.key bs=64 count=1
12. rida:		23. rida:
	1+0 records out		1+0 records out
	64 bytes transferred in 0.000397 secs (161126 bytes/sec)		64 bytes transferred in 0.000397 secs (161126 bytes/sec)

			Seejärel seome võtme kettaseadmega ja paneme paika parooli
			millega saame edaspidi kasutada

	geli init -s 4096 -K /root/da0.key /dev/da0		geli init -s 4096 -K /root/da0.key /dev/da0
	Enter new passphrase:		Enter new passphrase:
	Reenter new passphrase:		Reenter new passphrase:

			Ning haagime ketta külge

	geli attach -k /root/da0.key /dev/da0		geli attach -k /root/da0.key /dev/da0
	Enter passphrase:		Enter passphrase:

	GEOM_ELI: Device da0.eli created.		dmesgi peaks ilmuma seejäre teade
	GEOM_ELI: Encryption: AES-CBC 128
	GEOM_ELI: Crypto: software		GEOM_ELI: Device da0.eli created.
			GEOM_ELI: Encryption: AES-CBC 128
			GEOM_ELI: Crypto: software

			kausta /dev peaks nüüd olema tekkinud uus seade da0.eli

	ls /dev/da0*		ls /dev/da0*
	/dev/da0 /dev/da0.eli		/dev/da0 /dev/da0.eli

			Alustame uue failisüsteemi loomist. Selleks on
			soovitatav kirjutada kogu ketas algusest lõpuni suvalise infoga üle.
			See võib võtta suurema ketta puhul aega 3-4 tundi.

	dd if=/dev/random of=/dev/da0.eli bs=1m		dd if=/dev/random of=/dev/da0.eli bs=1m
	40859860992 bytes transferred in 10024.286856 secs (4076087 bytes/sec)		40859860992 bytes transferred in 10024.286856 secs (4076087 bytes/sec)

			Loome uue failisüsteemi

	newfs /dev/da0.eli		newfs /dev/da0.eli
34. rida:		60. rida:
	using 207 cylinder groups of 336.98MB, 21567 blks, 21568 inodes.		using 207 cylinder groups of 336.98MB, 21567 blks, 21568 inodes.
	super-block backups (for fsck -b #) at:		super-block backups (for fsck -b #) at:

			Ja moundime enda ketta

	mount /dev/da0.eli /mnt		mount /dev/da0.eli /mnt
42. rida:		70. rida:
	/dev/da0.eli 70009144 8 64408408 0% /mnt		/dev/da0.eli 70009144 8 64408408 0% /mnt

			Lahtihaakimiseks käsud

	umount /mnt		umount /mnt
	geli detach da0.eli		geli detach da0.eli

			Ja dmesgi tekib lahtiühenduse kohta teade

	GEOM_ELI: Device da0.eli destroyed.		GEOM_ELI: Device da0.eli destroyed.

			Uuesti haakida saab siis käskudega. Kasutada
			tuleb varem nimetatud paroole

	geli attach -k /root/da0.key /dev/da0		geli attach -k /root/da0.key /dev/da0
	mount /dev/da0.eli /mnt		mount /dev/da0.eli /mnt

	rc.conf		rc.conf'i automaatseks stardiks.
			Ei pääse muidugi iga taaskäivituse järle paroolide trükkimisest

	geli_devices="da0"		geli_devices="da0"

Jj – 28. detsember 2007, kell 22:24

2007-12-28T22:24:39Z

←Vanem redaktsioon		Redaktsioon: 28. detsember 2007, kell 22:24
4. rida:		4. rida:

	geom_eli_load="YES"		geom_eli_load="YES"

			cryptosoft0: <software crypto> on motherboard


	dd if=/dev/random of=/root/da0.key bs=64 count=1		dd if=/dev/random of=/root/da0.key bs=64 count=1
16. rida:		19. rida:
	geli attach -k /root/da0.key /dev/da0		geli attach -k /root/da0.key /dev/da0
	Enter passphrase:		Enter passphrase:

			GEOM_ELI: Device da0.eli created.
			GEOM_ELI: Encryption: AES-CBC 128
			GEOM_ELI: Crypto: software

	ls /dev/da0*		ls /dev/da0*
38. rida:		45. rida:
	umount /mnt		umount /mnt
	geli detach da0.eli		geli detach da0.eli

			GEOM_ELI: Device da0.eli destroyed.

	geli attach -k /root/da0.key /dev/da0		geli attach -k /root/da0.key /dev/da0

Jj – 28. detsember 2007, kell 22:14

2007-12-28T22:14:07Z

←Vanem redaktsioon		Redaktsioon: 28. detsember 2007, kell 22:14
1. rida:		1. rida:
	===Geli===		===Geli===

			rc.conf

			geom_eli_load="YES"

	dd if=/dev/random of=/root/da0.key bs=64 count=1		dd if=/dev/random of=/root/da0.key bs=64 count=1

Jj – 28. detsember 2007, kell 22:12

2007-12-28T22:12:44Z

←Vanem redaktsioon		Redaktsioon: 28. detsember 2007, kell 22:12
1. rida:		1. rida:
	===Geli===		===Geli===

	dd if=/dev/random of=/root/da0.key bs=64 count=1		dd if=/dev/random of=/root/da0.key bs=64 count=1
	1+0 records in		1+0 records in
	1+0 records out		1+0 records out
	64 bytes transferred in 0.000397 secs (161126 bytes/sec)		64 bytes transferred in 0.000397 secs (161126 bytes/sec)

			geli init -s 4096 -K /root/da0.key /dev/da0
			Enter new passphrase:
			Reenter new passphrase:

	geli ~~init~~ -~~s 4096 -K~~ /root/da0.key /dev/da0		geli attach -k /root/da0.key /dev/da0
	Enter ~~new passphrase:~~		Enter passphrase:
	~~Reenter new~~ passphrase:

			ls /dev/da0*
			/dev/da0 /dev/da0.eli

	~~geli attach -k~~ /~~root~~/~~da0.key~~ /dev/da0		dd if=/dev/random of=/dev/da0.eli bs=1m
	~~Enter passphrase:~~		40859860992 bytes transferred in 10024.286856 secs (4076087 bytes/sec)

	ls /dev/da0*		newfs /dev/da0.eli
	~~/dev/da0~~ /dev/da0.eli		/dev/da0.eli: 69464.8MB (142263992 sectors) block size 16384, fragment size 4096
			using 207 cylinder groups of 336.98MB, 21567 blks, 21568 inodes.
			super-block backups (for fsck -b #) at:

	~~dd if=/dev/random of=~~/dev/da0.eli ~~bs=1m~~		mount /dev/da0.eli /mnt
	~~40859860992 bytes transferred in 10024.286856 secs (4076087 bytes~~/~~sec)~~

	~~newfs /dev/da0~~.~~eli~~		df
	/dev/da0.eli~~: 69464.8MB (142263992 sectors) block size 16384, fragment size 4096~~		Filesystem 1K-blocks Used Avail Capacity Mounted on
	~~using 207 cylinder groups of 336.98MB, 21567 blks, 21568 inodes.~~		...
	~~super-block backups (for fsck -b #) at:~~		/dev/da0.eli 70009144 8 64408408 0% /mnt


	~~mount /dev/da0.eli~~ /mnt		umount /mnt
			geli detach da0.eli
	df

	~~Filesystem 1K-blocks Used Avail Capacity~~ ~~Mounted on~~
	~~/dev/ad2s1a 507630 130382 336638 28% /~~
	~~devfs 1 1 0 100% /dev~~
	~~/dev/ad2s1e 507630 12 467008 0% /tmp~~
	~~/dev/ad2s1f 35492564 131230 32521930 0% /usr~~
	~~/dev/ad2s1d 1120718 420 1030642 0% /var~~
	~~/dev/~~da0.eli ~~70009144 8 64408408 0% /mnt~~


			geli attach -k /root/da0.key /dev/da0
			mount /dev/da0.eli /mnt

			rc.conf

			geli_devices="da0"
			geli_da2_flags="-p -k /root/da0.key"

	===vinum===		===vinum===

Jj – 28. detsember 2007, kell 22:09

2007-12-28T22:09:03Z

←Vanem redaktsioon		Redaktsioon: 28. detsember 2007, kell 22:09
1. rida:		1. rida:
			===Geli===

			dd if=/dev/random of=/root/da0.key bs=64 count=1
			1+0 records in
			1+0 records out
			64 bytes transferred in 0.000397 secs (161126 bytes/sec)


			geli init -s 4096 -K /root/da0.key /dev/da0
			Enter new passphrase:
			Reenter new passphrase:


			geli attach -k /root/da0.key /dev/da0
			Enter passphrase:

			ls /dev/da0*
			/dev/da0 /dev/da0.eli

			dd if=/dev/random of=/dev/da0.eli bs=1m
			40859860992 bytes transferred in 10024.286856 secs (4076087 bytes/sec)

			newfs /dev/da0.eli
			/dev/da0.eli: 69464.8MB (142263992 sectors) block size 16384, fragment size 4096
			using 207 cylinder groups of 336.98MB, 21567 blks, 21568 inodes.
			super-block backups (for fsck -b #) at:


			mount /dev/da0.eli /mnt

			df

			Filesystem 1K-blocks Used Avail Capacity Mounted on
			/dev/ad2s1a 507630 130382 336638 28% /
			devfs 1 1 0 100% /dev
			/dev/ad2s1e 507630 12 467008 0% /tmp
			/dev/ad2s1f 35492564 131230 32521930 0% /usr
			/dev/ad2s1d 1120718 420 1030642 0% /var
			/dev/da0.eli 70009144 8 64408408 0% /mnt




	===vinum===		===vinum===

Jj – 31. oktoober 2007, kell 10:42

2007-10-31T10:42:20Z

←Vanem redaktsioon		Redaktsioon: 31. oktoober 2007, kell 10:42
1. rida:		1. rida:
	===vinum===		===vinum===

			http://www.vinumvm.org/


	Starting up Vinum Early Enough for the Root Filesystem '''/boot/loader.conf'''		Starting up Vinum Early Enough for the Root Filesystem '''/boot/loader.conf'''
76. rida:		79. rida:


			===gmirror===
	===~~mirror~~===

Jj – 31. oktoober 2007, kell 10:39

2007-10-31T10:39:58Z

←Vanem redaktsioon		Redaktsioon: 31. oktoober 2007, kell 10:39
4. rida:		4. rida:

	vinum_load="YES"		vinum_load="YES"

			/boot/loader.conf grub start

			geom_vinum_load="YES"
			vinum.autostart="YES"


10. rida:		15. rida:
	disklabel -e devname		disklabel -e devname


	~~a: 1024000 281 4.2BSD 2048 16384 0~~
	~~b: 16 vinum~~


40. rida:		42. rida:

	hiljem newfs -v		hiljem newfs -v

	~~/boot/loader.conf grub start~~

	~~geom_vinum_load="YES"~~
	~~vinum.autostart="YES"~~