LSI Raid

Allikas: Kuutõrvaja

raid kontroller

LSI-05 set raid disk.png

Raidikaardi integreeritud biosi vaade.

FreeBSD

Seda kas draiver laetud saab kontrollida dmesgist

mpt0: <LSILogic SAS/SATA Adapter>

Utiliit info vaatamiseks on juba süsteemiga kaasas

# mptutil show config
mpt0 Configuration: 1 volumes, 2 drives
    volume 0 (136G) RAID-0 64k OPTIMAL spans:
        drive 1 (68G) ONLINE <SEAGATE ST973401LSUN72G 0556> SAS
        drive 0 (68G) ONLINE <SEAGATE ST973401LSUN72G 0556> SAS
        spare pools: 0

Või raid 1

# mptutil show config
mpt0 Configuration: 1 volumes, 2 drives
    volume 0 (68G) RAID-1 OPTIMAL spans:
        drive 1 (68G) ONLINE <SEAGATE ST973401LSUN72G 0556> SAS
        drive 0 (68G) ONLINE <SEAGATE ST973401LSUN72G 0556> SAS
        spare pools: 0

vaatame kettaid

# mptutil show drives
mpt0 Physical Drives:
   0 (   68G) ONLINE <SEAGATE ST973401LSUN72G 0556> SAS bus 0 id 3
   1 (   68G) ONLINE <SEAGATE ST973401LSUN72G 0556> SAS bus 0 id 4

testime

root@testikas:/usr/home/jj # mptutil show volumes
mpt0 Volumes:
  Id     Size    Level   Stripe  State  Write-Cache  Name
     0 (  136G) RAID-0      64k OPTIMAL   Disabled

Debian

megaraid_sas

lspci väljundis peaks olema

02:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)

https://wiki.debian.org/LinuxRaidForAdmins

mptsas

Paigalduseks

# apt-get install mpt-status

Kasutamiseks sobib öelda

# modprobe mptctl
# lsmod |grep mptctl 
mptctl                 31794  0 
mptbase                95785  1 mptctl
# mpt-status
ioc0 vol_id 0 type IM, 2 phy, 930 GB, state OPTIMAL, flags ENABLED
ioc0 phy 1 scsi_id 8 ATA      ST31000528AS     CC38, 931 GB, state ONLINE, flags NONE
ioc0 phy 0 scsi_id 1 ATA      ST31000528AS     CC38, 931 GB, state ONLINE, flags NONE
04:08.0 RAID bus controller: Hewlett-Packard Company Smart Array E200i (SAS Controller)

Kõigepealt mõned vajalikud sõltuvused

# aptitude install lib32gcc1 lib32stdc++6

Seejärel vaja tõmmata hp saidilt hpaccucli käsutööriista pakk

http://downloads.linux.hp.com/SDR/downloads/ProLiantSupportPack/Debian/pool/non-free/

Ning see paigaldada

# dpkg -i hpacucli_8.70-8.0.2-2_amd64.deb

kasutamine

# hpacucli ctrl all show config
Smart Array E200 in Slot 1                (sn: PA6C90P9SWN211)

   array A (SAS, Unused Space: 0 MB)
 

      logicaldrive 1 (68.5 GB, RAID 0, OK)

      physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 73.5 GB, OK)

   array B (SAS, Unused Space: 0 MB)


      logicaldrive 2 (558.7 GB, RAID 5, OK)

      physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 300 GB, OK)
      physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK)
      physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 300 GB, OK)

Staatus

# hpacucli ctrl all show status

Smart Array E200 in Slot 1
   Controller Status: OK
   Cache Status: OK
   Battery/Capacitor Status: OK
hpacucli> ctrl slot=0 pd 2:3 modify led=on            ## To enable or Disable the LED
hpacucli> ctrl slot=0 pd 2:3 modify led=off

Create LogicalDrive with RAID 5 using five drives:

hpacucli> ctrl slot=0 create type=ld drives=1:13,1:14,1:15,1:16,1:17 raid=5
hpacucli> ctrl slot=0 ld 4 delete                                   ## To Delete LogicalDrives

Gentoo

# emerge sys-block/megacli,
* Upstream has implement a mandatory clickthrough EULA for distfile download
* Please visit http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/8.02.21_MegaCLI.zip
* And place 8.02.21_MegaCLI.zip in /usr/portage/distfiles
# /opt/bin/MegaCli -PDList -aALL | grep Error


FreeBSD

Kui dmesgis on aga ciss draiver

ciss0: <HP Smart Array E200>

Smartmontooliga

# smartctl -iH -d cciss,0 /dev/ciss0

Viimase 2013 augusti alguse seisuga.

===>  hpacucli-7.50_3 is marked as broken: currently does not work on amd64 (see PR ports/128288).
*** Error code 1

Kasutatav on ka camcontrol

camcontrol devlist
<COMPAQ RAID 1(1VOLUME OK>         at scbus0 target 0 lun 0 (pass0,da0)

Kui ketas on eemaldatud on volume seisus "inte"

# camcontrol inquiry da0 -D
pass0: <COMPAQ RAID 1(1VOLUME inte> Fixed Direct Access SCSI-5 device

Gentoo

# cciss_vol_status /dev/cciss/c0d0
/dev/cciss/c0d0: (Smart Array E200) RAID 1 Volume 0 status: OK.

Rohkem infot

# cciss_vol_status -s -V /dev/cciss/c0d0
Controller: Smart Array E200
  Board ID: 0x3212103c
  Logical drives: 0
  Running firmware: 1.78
  ROM firmware: 1.78
/dev/cciss/c0d0: (Smart Array E200) RAID 1 Volume 0 status: OK.
  Physical drives: 4
         connector 1I box 1 bay 1                 HP DF03Dell Perc00B8053                          3QP0CGM2000099130AAD     HPD1 OK
         connector 1I box 1 bay 2                 SEAGATE ST3300657SS                          6SJ52A8C0000N2409BM5     0008 OK
         connector 1I box 1 bay 3                 HP DF0300B8053                          3QP0CFYM000099130C1T     HPD1 OK
         connector 1I box 1 bay 4                 HP DF0300B8053                          3QP0CH9E00009913142T     HPD1 OK

http://www.nico.schottelius.org/docs/freebsd-raid-monitoring/ palju väärt infot.